How to Turn My Fitbit Sense On


How to Turn On Fitbit Sense

The Sense is an activity tracker that monitors your heart rate, steps taken, calories burned, and how many minutes you are active. It also has a sleep mode to monitor how long and well you slept. The device syncs wirelessly with other fitness devices.

Did you know that the Sense and Fitbit Versa use the same way of turning on the device? To turn it on, make sure the device is charged, then press and hold the button on the side for a few seconds until the watch vibrates. The light will turn on and you will see the time.

Setting Up My Fitbit Sense

The Fitbit app for iOS and Android devices may be used to set up Sense. Fitbit’s app is compatible with the majority of smartphones on the market. 

To begin, here are the steps:

  1. Install the Fitbit app on your smartphone: The App Store for iPhone and iPad, Google’s Android app store
  2. Launch the app after installing it.
  3. Log in to your Fitbit account if you already have one.
  4. The Today tab may be accessed by clicking on it.
  5. Tap your profile picture
  6. Then choose “Set Up A Device”
  7. If you don’t already have a Fitbit account, press the Join Fitbit button to begin the process of creating one.

Connecting Sense to your account is as simple as following the on-screen instructions.

How to Charge Your Fitbit Sense

It may last for up to six days on a full charge. The number of times a battery may be recharged and the amount of time it lasts depends on a variety of variables, including the kind of usage.

  1. To charge Sense, connect the USB charging cord to either a USB port on your computer or a UL-certified USB wall charger.
  2. A charging cable may be attached to a watch’s back by holding one end of the cable near the port until it magnetizes. Your watch’s charging port has to be aligned with your cable’s pins.

You may expect to get 24 hours of battery life by charging Sense for just over half an hour. While the watch is charging, you may turn on the display by pressing the button or tapping the screen twice.

During charging, the battery level shows for a brief period, then vanishes, allowing you to continue using your watch. 1-2 hours are needed to completely recharge the device.

How to Properly Wear Your Watch

It’s usually a good idea to take a break from wearing your watch for roughly an hour after a long period. While taking a shower, you should not wear your watch. This may seem counterintuitive, but not only does it keep your watch cleaner, but it also helps prevent skin irritation and long-term harm to your watch.

Tracking your heart rate while exercising has never been easier than with the Heart Rate Monitor. Try putting the band higher on your wrist during exercises to ensure a better fit. If you’re having any pain, try loosening the band and, if that doesn’t work, remove it altogether.

Make sure the back of your watch is in touch with your skin when wearing it on top of your wrist.

How to Turn Off Fitbit Sense

  1. On your Home screen, choose Settings.
  2. When you get to the bottom of the screen, look for the option to Shutdown.
  3. The arrow in the bottom right corner may be tapped.
  4. To confirm shutdown, press the checkmark.

How to Fix a Fitbit Sense Not Turning On

Restart Fitbit Device

It’s a good idea to reset your Fitbit Sense as soon as you notice it isn’t working properly. There is no data loss as a result of this procedure since the watch’s operating system is updated.

Hold the solid-state button for ten seconds until the Fitbit logo appears on the screen, then release it.

Charge Your Fitbit

Perhaps the Fitbit Sense battery is almost completely dead. In this scenario, you must first charge your watch before using it.

Ensure pins on the charging cable align with the watch’s port on the back.

Clean the Charging Contacts

Clean the charging contacts on the Sense’s back and the charging pad to keep their bronze or gold color.  Using a rubbing alcohol-soaked toothbrush is one option. Before putting it on a charger, make sure it’s completely dry. When cleaning the contacts, do not use any metal substance because it will damage it.

Maintaining your Fitbit requires that you keep it clean and dry regularly. Clean the band or gadget using fresh water and a soap-free cleanser rather than using hand soap, dish soap, hand sanitizers, cleaning wipes, home cleaners, or other similar cleaning products.

For a new watch, the charging pins will still be covered by the plastic protective cover if you are charging it for the first time. To charge the gadget, you must remove this cover.

Buying a New Charger

It might be that the charger you’re using isn’t up to par. UL-certified wall chargers may be used to recharge the Fitbit. Using the charger to charge another device is a good way to see whether it is functioning. If the charging pad is also broken, buy a new one.

Adjust Screen Brightness

Due to the display brightness being set to its lowest value, the watch may seem to be off from time to time. Increase the watch’s brightness to see if that helps.

On your Fitbit device, open the Settings app, then scroll down until you see the option to display. Adjust the brightness to your preferred level

Change to Automatic Screen Wake Setting

If you have this option set to manual, the watch screen will not turn on when you lift your wrist. For the screen to turn on automatically, you will need to adjust the setting to auto.

  1. The fast settings may be accessed by swiping right from the clock face of your watch.
  2. To make Screen Wake automatic, just tap on it.

Avoid using Sleep Mode, which will disable screen wake and lower the screen brightness, since this will prevent you from using the device’s screen.

Use a Different Clock Face

If the watch’s clock face is causing the issue, it’s possible to fix it. The safest bet is to switch to a regular clock face, thus this is the best option. Use the Fitbit app on a linked phone or tablet to do this.

  1. When you’re in the Fitbit app’s Today tab, touch your profile image, then the Sense tile.
  2. To access the Gallery, click or touch the appropriate button.
  3. The Clock tab may be accessed by clicking on it.
  4. Check out the available clock faces.
  5. Detailed views are available by tapping on any clock face.
  6. Sense’s clock face may be installed by tapping Install.

Upgrade Your Fitbit’s Software

It is common for software upgrades to include new features and patches for flaws that were present in the previous version. Make certain that your watch is up to date with the most recent update.

Check out these tips before upgrading your watch’s operating system:

  • Ensure that the Fitbit battery is completely charged before using the device.
  • The Fitbit app on your phone or tablet should be updated to the most recent version.
  • If you enable the Fitbit app to operate in the background, you will be able to get firmware upgrades.
  • A 24-hour erroneous step count is possible if you update your smartphone at midnight (the time when the step counter refreshes).
  • This might take up to an hour or more on any Fitbit model upgrade.

Factory Reset the Device

You may also execute a factory reset as the last step in troubleshooting. This will reset the watch to its original factory settings and remove any data saved on it.

To factory reset your Fitbit gadget, tap Settings and select About, then choose Factory Reset.

Quick Tips When Using Fitbit Sense

  • Use your charging cord and connect it to a computer or other low-energy charging device instead. Because using a battery pack may cause harm to your tracker, therefore avoid doing so.
  • To start tracking your activity, hold the button down again until you see the options for steps, heart rate, or calories burned. Select the option you want to track and then release the button.
  • To put the Fitbit sense in sleep mode, hold the button until you see the time. Then, hold the button down again and select “sleep.” The device will track your sleep duration and quality.
  • To sync with other devices, open the Fitbit app and go to the dashboard. Tap on “Devices” in the top right corner and select the type of device you want to sync with. The Fitbit app will search for the device. Once it is found, select it and the devices will sync.
  • If you have any problems with your Fitbit sense, you can go to the Fitbit website and select “help.” You can then search for a specific problem or browse through the frequently asked questions. If you still cannot find an answer, you can contact customer service.

Recent Posts