How Long Does the Apple Watch Update Take?


How Long Does Apple Watch Take to Update?

If your iPhone alerts you that your Apple Watch software is out of the current, you should upgrade watchOS to keep your data, including Activity Data, synced to your iPhone.

For Apple Watches to function properly, they must be charged and linked to a reliable Wi-Fi network. The update might take anywhere from 15 minutes to over an hour to complete, depending on your internet speed.

How to Update Apple Watch

Apple Watch update time can be a little frustrating if you’re not prepared for it. Here’s how to speed up the process.

The first thing you’ll want to do is make sure your Apple Watch is fully charged. If it’s not, plug it in and give it some time to charge up. Once it’s charged, go ahead and turn it off.

Next, you’ll need to connect your Apple Watch to your iPhone. Make sure both devices are close to each other and that Wi-Fi is turned on for both devices. Once they’re connected, open the Watch app on your iPhone.

Tap on General and then Software Update. You should see the latest update for your Apple Watch. Tap on Download and Install to start the process. Input your Apple Watch Passcode or iPhone passcode if needed.

Your Apple Watch will restart a few times during the update process. Be patient, it’ll be done before you know it. Once it’s updated, you can turn it back on and enjoy the new features.

Note: Check to see whether your Apple Watch is up to date in terms of software: Apple Watch Series 3 and later and the Apple Watch SE are supported with watchOS 8.

Why is Apple Watch Updates Taking So Long?

When it comes to downloading watchOS software to your Apple Watch, the procedure is quite time-consuming. A watchOS software upgrade might take up to an hour or more to reach your watch.

The following factors influence how long it takes to transmit the installer to your watch:

  • You’re installing a large watchOS software update
  • Your watch’s Apple Watch model number (latest models have better processors that handle common operations faster)
  • Wireless data transport is affected by a variety of variables, including network interference.

How to Speed Up Apple Watch Update

If you have Bluetooth turned on on your iPhone, you may speed up Apple Watch software updates by moving the toggle to the OFF position under Settings Bluetooth.

Why does disabling Bluetooth speed up the update process so much?

To save as much battery life as possible, Apple Watch prioritizes Bluetooth over Wi-Fi. While Bluetooth consumes less power than Wi-Fi, the protocol is much slower than most Wi-Fi networking technologies in terms of data transmission speeds.

You can compel your Apple Watch to use Wi-Fi instead of Bluetooth by disabling Bluetooth on the associated iPhone at the proper moment.

Your Apple Watch does not automatically download watchOS upgrades, as is the case with other Apple products.

Your iPhone’s Watch app is used to download and install updates to your watch.

The newest watchOS update is downloaded and sent wirelessly to your wrist via your phone. WatchOS upgrades often weigh anything from a few hundred megabytes to over a gigabit, making the idea of sending that much data via Bluetooth ludicrous.

By temporarily disconnecting Bluetooth, you may speed up the process of delivering the installer to your watch, which is the weakest link in the chain.

Bluetooth must be turned off throughout the upgrade process at a specified point.

How to Update Apple Watch Without WiFi

There are a couple of ways to update your Apple Watch without WiFi. You can either use iTunes on your computer or use the Apple Watch app on your iPhone.

If you’re using iTunes, make sure your Apple Watch is plugged in and turned off. Next, open iTunes on your computer and click on the device tab. You should see your Apple Watch listed. Click on it and then click Update.

If you’re using the Apple Watch app on your iPhone, make sure your Apple Watch is plugged in and turned off. Next, open the Apple Watch app and tap on General. Tap Software Update and then Download and Install. Your Apple Watch will start updating.

Both methods will take some time, so be patient.

Ways to Fix Slow Apple Watch Software Update

Your iPhone and Watch should be Restarted

Restart your iPhone and watchOS device if your Apple Watch is displaying an increasingly lengthy estimated time to finish the upgrade process. To turn off your iPhone or Apple Watch, just press and hold the side button and then drag the Power Off slider. Turn your phone and watch back on after a minute.

Remove Update File

The update file should be deleted if it won’t start or is taking a long time to be completed.

  1. On your paired iPhone, open the Apple Watch app and begin using it.
  2. You may access Usage by going to the General tab and clicking on Usage.
  3. Once you’ve done that, choose Check for Updates.
  4. Remove the update file by simply deleting it. Not able to validate the watchOS 6 upgrade.
  5. Install watchOS once again.

Remember to upgrade your iPhone to the newest version, too. To check for software updates, go to the Settings app, then General, and Software Update. Try updating watchOS again after installing the latest iOS upgrades.

Disable/Re-enable the Network

Resetting your iPhone’s network settings, according to some users, may be the answer. Go to Settings, General, then Reset on your iPhone. Select Reset network settings from the drop-down menu that follows.

You’ll lose access to all of your Wi-Fi networks and passwords. Check to see whether the problem remains after setting up a fresh connection. Check for improvements by connecting your devices to a different network. It’s possible that your current internet connection is unreliable.

Re-Pair Your Devices

  1. On your iPhone, open the Watch app.
  2. Select All Watches from the My Watch tab drop-down menu.
  3. On your watch, press the Info button.
  4. Then click on Unpair Apple Watch to remove the connection.
  5. Reboot your device.
  6. Run Watch app and connect your devices to each other.

During the setup procedure, your watch should automatically upgrade to the newest watchOS version.

How to Enable Automatic Updates on Apple Watch?

You can enable automatic updates on your Apple Watch by going to the Settings app and then General. Tap on the Software Update page and then turn on Automatic Updates. Your Apple Watch will now update automatically whenever a new version is released.

Does Apple Watch Need the Same Wi-Fi Network as My iPhone to Update?

No, the Apple Watch does not need to be on the same WiFi network as your iPhone to update. However, it is recommended that you use the same network so that the update process goes smoothly.

Recent Posts